⎝⎛真人游戏开户注册⎞⎠

Qidong Gelate Petrochemical Equipment Co., Ltd.

Professional research and development, design, manufacturing: static mixing equipment, pipeline filtration equipment, mixing equipment, conveying equipment ----- global trusted quality!

0513-83660619
Products

Y-type pump filter

Product specifications: Y-type pump filter

The pump pipeline filter is also called a bottom valve. It has a filter at one end. It is generally used at the suction port of the pump to prevent impurities from entering the pump and damaging the pump accessories. At the same time, the water in the pump can be kept from flowing back when the pump is stopped. Need irrigation and exhaust.
Main structure and working principle of pipeline filter Pipeline filter for pump is mainly composed of main pipe, branch pipe, filter cartridge, flange, flange cover and fastener.
Pipeline The water to be processed by the pipe filter enters the body through the water inlet, and impurities in the water are deposited on the stainless steel filter screen, thereby generating a pressure difference. The pressure difference switch monitors the pressure difference at the water outlet of the filter. When the pressure difference reaches the set value, the electric water supply control valve of the electric controller drives the motor signal to trigger the following actions: the motor drives the brush to rotate, cleans the filter element, and controls The valve is opened for drainage, and the entire cleaning process only takes tens of seconds. When the cleaning is completed, the control valve is closed, the motor stops rotating, the system returns to its initial state, and begins to enter the next filtration process. The pump pipeline filter is mainly composed of a main pipe, a branch pipe, a filter cartridge, a flange, a flange cover and a fastener, etc. After the fluid enters the filter cartridge through the main pipe, solid foreign particles are blocked in the filter cartridge, and the clean fluid Discharge through the filter cartridge through the outlet of the pipe filter. When cleaning is needed, screw the screw plug at the bottom of the pipe to drain the fluid, remove the flange cover, remove the filter cartridge, and then reinstall it after cleaning. Therefore, it is widely used in petroleum, chemical, and sewage filtration.
The pump pipeline filter is also called a bottom valve. It has a filter at one end. It is generally used at the suction port of the pump to prevent impurities from entering the pump and damaging the pump accessories. At the same time, the water in the pump can be kept from flowing back when the pump is stopped. Need irrigation and exhaust. After the fluid enters the filter cartridge through the main pipe, solid foreign particles are blocked in the filter cartridge, and the clean fluid is discharged through the filter cartridge through the filter outlet. When cleaning is needed, screw the screw plug at the bottom of the pipe to drain the fluid, remove the flange cover, remove the filter cartridge, and then reinstall it after cleaning. Therefore, it is widely used in petroleum, chemical, and sewage filtration.
Performance specification of pump pipeline filter 1. Implementation standard: Q / 12 NJ3583-2001
2. Test standard: GB / T13927-1992
Pump pipeline filter specifications, models and technical parameters

Nominal diameter DN Installation size MM Pipe plug N
L H
15 140 120 RC1 / 4
20 140 120
25 140 120
32 170 160
40 270 180
50 270 190 RC3 / 8
65 290 190
80 360 250 RC3 / 4
100 410 280
135 480 330
150 520 360 M20x1.5
200 660 450
Chart (DN15-50, PN≤5.0MPa)
1. Y-type flanged cast filter with the same diameter (KGYI-F type)
2. Y-type flanged welded filter (KGYII-F type)
3. Y-type welded filter with jacketed flange connection (KGYJII-F type)
4. Y-type different diameter butt-welded connection filter (KGYJII-W type)
Related filter and pipe filter technical data can be obtained by contacting our company.

欢乐拼三张 七乐彩 欢乐拼三张 真人游戏平台注册